Cablu FTP patch Belden cat.5E 1868ENH

Belden 1868ENH - Patch - Halogen-free version
(S)FTP Category 5E
Description
 Shielded Twisted Pair Cable, 4 pairs x AWG 26. Solid bare cooper conductors, polyolefine insulation, overall foil shield, tinned copper drain wire. Colour code: see DataTwist® colour code table.
 Applicable industry standards: EN 50173, ISO/IEC 11801, TIA/EIA 568-B2
 
Cablu patch FTP cat.5E Belden 1868ENH
Frequency (MHz) 1 4 8 10 16 20 25 31.25 62.5 100
Attenuation
(dB/100m)
max. (Cat.5E) 3.2 6.0 8.5 9.5 12.1 13.6 15.2 17.1 24.8 32.0
typical 2.5 5.0 7.0 7.9 9.9 11.1 12.5 14.0 20.5 26.3
NEXT (dB) min. 65 56 52 50 47 46 44 43 38 35
typical 69 60 56 54 51 50 48 47 42 39
PS-NEXT (dB) min. 62 53 49 47 44 43 41 40 35 32
typical 67 58 54 52 49 48 46 45 40 37
PS-ELFEXT (dB) min. 61 49 43 41 37 35 33 31 25 21
typical 77 65 59 57 53 51 49 47 40 36
ACR (dB/100m) min. 62.1 50.3 43.3 40.8 35.2 32.2 29.1 25.8 13.6 3.3
typical 67 55 49 46 41 39 36 33 22 13
PS-ACR (dB/100m) min. 59.1 47.3 40.3 37.8 32.2 29.2 26.1 22.8 10.6 0.3
typical 65 53 47 44 39 37 34 31 20 11
RL (dB) min. 20.0 23.0 24.5 25.0 25.0 25.0 24.3 23.6 21.5 20.1
typical 32 33 41 42 41 40 37 33 30 27
Number of pairs: 4
Standard Colour: Grey, Blue, Red, Green, Yellow
Typical velocity of propagation (%) : 70
Max. DCR (Ohm/km) : 135
Nominal capacitance (pF/m) : 50
Diameter of insulated conductor (mm): 0.95
 
Nominal overall diameter (mm): 5.2
Impedance (Ohm) : 100 Ohm ± 15%
Enargy of flame (kJ/m):
  Single
E 370
ENH 355
* Specification is subject to change without notice